Subject: Felix Wankel orginal technical paper
From: ACRE NL
Date: 6/25/2002, 11:07 AM


Vance, I have a excellent copy of Felix Wankel's original technical
paper;
Eintellung der Rotations Kolbenmaschinen presented in 1963 at
Technische
Entwicklungsstelle der Fraunhofer-Gesellschaft Lindau/Bodensee.
It is written in German and has dozens if not scores of configurations
of
rotary engines all illustrated in color that Felix considered before
he
decided
on the rotary configuration we now know and love. It was give to me by
Eurgen Bax Pres. of Wankel Gmbh when I visited the factory in Korf.
Are
you
interested in a copy? The paper is 60 pages with about
20 pages in color. This would add greatly to your presentation on the
Wankel rotary. You must pay for the copy :-)

Paul Lamar


Paul,

I would like to at least have the equations that determine the shape of
the
combustion chamber and rotor. If that is contained in that paper, could
you
scan the page with that info? If it is not conveniently located on one
page could you recommend a source for this info?

Monty


Those equations are in Kenichi Yamamoto's book and I will scan them in
later today Monty. Not in Felix's paper.

Paul Lamar

You can generate the housing shape by a simple description of the path of
one rotor tip.
for eccentric angle from zero to 3 turns (degrees or radians your choice)
X = eccent radius times sine eccent angle,  plus rotor radius times sine
eccent angle/3
Y= eccent radius times cosine eccent angle, plus rotor radius times cos
eccent angle/3
this will generate the housing around zero,zero housing center,
The rotor is basicaly a triangle with the sides bulged out to just clear the
wall
Vance J.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org