Subject: replacement 20B eccentric shafts or build up of one
From: ACRE NL
Date: 6/28/2002, 7:37 PM


Hi,

Thank you for your e-mail.

We are doing a another run shortly of '20b' cranks for 'standard
plates',
but we can also likely supply 'genuine plate' cranks, what
specifically
are
you after and numbers expected/required etc?

Regards, Rohan Ambrose gururacing@gurumotorsports.com

I see you have a 2 piece `13B shaft. We here in the States need a
source
for replacement 20B shafts! Any thoughts?

Marc Wiese


Well, it looks like we have a source for 20B eccentric shafts, no? I
don't know what to tell him about our needs. Does anyone know what he
means about "plates".
Marc Wiese


     Perhaps he is referring to the side housings? But what is a "standard"
  plate crank as opposed to a "genuine" plate crank?

      Kelly troyer

Maybe he means that he can build a shaft to use either the
thicker 20B 'center' (intermediate) housing or to use 2 13B
center housings.

Charlie England


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org