Subject: Tension Bolts One rotor?
From: ACRE NL
Date: 6/30/2002, 8:28 AM


Paul wrote:


There must be a one rotor mailing list out there :-)



Fred Osborn wrote:


Yes there has been. We sort of got started at Francois instigation just as you
were leaving for Oz. It kept us from getting the "no message" shakes while you
were shut down! We have sort of continued during this heavy restart traffic, it
might help you keep your traffic down. Would you like us to come back on the
ACRE site or copy you on our short list ? We are not trying to be exclusive,
any one can join. Let us know what you would prefer.

I would prefer to have our discussions on your ACRE site in order to have the
collective wisdom of everyone backing us up. Face it, most of us are real
newbies at this and need all the "mothering" we can get but at the same time we
don't want to burden you (:>}.

Fred O.

Its OK Fred I am overloaded anyway. It is good you guys can solve your
unique one rotor problems. How is Royce coming with the aluminum end
covers? That is something I am really curious about as it will save
weight on the two rotor as well.

BTW I did not find any 1/2 inch bolts
in McMaster Carr long enough for the two rotor so I guess they will
be custom as well. A search of google.com for fasteners might be in order.
It is kind of silly to pay Mazda $17 each when something stronger, much cheaper and
with a higher resonant frequency is available.

Paul Lamar


Thats for sure Paul.
The Cadillac bolts are too long for a single rotor, and too short for a
two rotor. I will look at something else.  I have never known of one of
them ever causing any problems in any way.
On the end housings, we are finishing up the pattern. Would like to find
some aluminum plate to use  to eliminate the problems involved in
casting one. Plate runs up in dollars tho.
Royce

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org