Subject: Side Housing Exhaust Ports
From: ACRE NL
Date: 8/1/2002, 10:08 PM


Hi Paul,
When I first contacted you asking how to get 120 HP from a rotary weighing
not more than 160 lbs. you suggested to make peripheral ported intake single
rotor engine or a turbo charged version.  Since then I was thinking about the
best approach for my needs.  I bought a 13B engine from a wrecked 1986 model
car.  I found one of the rotor housing in good shape and a thought occured to
me.  What if I remove the insert from the exhaust port and use this as the
intake reversing the direction of the rotation.  Since I am planning to
design and make special light aluminum side housings I could incorporate
steel inserted exhaust ports.  Wouldn't it be nice to know the size, shape
and location of the new Mazda RX8 exhaust ports?  Is there any way to find
this out short of buying a new car/engine and tearing it down.  If my idea is
feasible I could get a very simple system with a lightweight exhaust muffler.
 I am for the utmost simplicity, remember KIS. What do you think Paul?

                                        Regards,
                                        Joseph Zappel

I think there is serious cooling problems running the rotary backwards
as I recall. We discussed that a few years ago.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org