3 rotor wrote:
what are people's feelings about putting a centrifical supercharger
instead of a turbo charger on a 20B? Bruce says that the extra 200 degrees
exhaust temps of the rotary engines is a problem. It seems though the
turbo might fix the exhaust bark as well as provide power. What kind of
typical expenses might the two systems run? I was interested in simply
normalizing at altitude rather than pure boost.
I read some terrible reviews of the current Paxton superchargers,
that Vortech seemed to be the best now. Is this true? Kevin
Well you have the same problems as a two rotor. Superchargers use
engine HP so the cooling system must be beefed up more than would be
required with a turbo charger system.
Turbo chargers use the waste HP in the form of heat energy
in the exhaust.
Since the engine is generating the extra HP to drive
the super charger it is burning more gas than would otherwise
be the case so your MPG is going way down. Eaton SC's work on cars
because they use a clutch and disengage the super charger
when the engine is generating only 40 HP and 2000 RPM or so
going down the road. You don't need a clutch with a centrifugal
supercharger as the boost and HP consumption only kicks in at high RPM.
That is not an option with an aircraft engine. It runs
at high RPM/HP all of the time.
Then you have not only the weight of the supercharger
but that of the required larger muffler too.
The guy with this super charged Cozy will soon find these things
out if he does not destroy the Lycoming engine first. A rotary
will tolerate a lot of boost unlike a delicate and on the
ragged edge aircraft piston engine.
Paul Lamar
Opps. Forgot the photo.
Paul Lamar
The Springer Family wrote:
Paul, others,
I saw this plane as OSH - it's not a Cozy, it's an E-Racer or a Speed
Queen (I think.) Cozies have 3 or 4 seats, no retracts, different shape,
etc.
Jim Springer
Lindenhurst, Illinois
Cozy MKIV #0657 Chapter 7--
Thanks Jim. I am no Canard expert as you can tell.
Anything with two in the front and a back seat looks like
a Cozy to me. I can usually identify a Velocity because of
the shape of the cabin.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org