Subject: Free RV4 Aluminum engine cowl]
From: ACRE NL
Date: 8/6/2002, 12:10 PM


This might be of interest to anyone building an RV-4 and installing a rotary.
I rolled an aluminum engine cowl out of .063 2024 TO(it work hardens as it is rolled) several years ago for my RV-4. I've since decided to make a cowl out of carbon fiber for weight savings purposes. The cowl is similar to the stock cowl, with the following exceptions- the spinner should be 14 inches in diameter, the prop flange should be 44" in front of the firewall, and it uses the same thrust line. The cowl has no cowl cheeks, as it was meant for a rotary. I also have the station buck that I built to model the cowl on. I found a friend of Dave Atkins who had an english wheel and was gracious enough to let me use it roll this cowl.

Now, the point of this posting- I'll give this cowl and station buck free to anyone who can use it- I need to have the space in my shop. Just come and get it. I don't have any photos of it handy, but might be able to find one or two in the next day or two.  Anyone interested, let me know.
Brian Trubee
Redmond,WA


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org