Tom Webber wrote:

Help,  I'm in the process of pulling my engine apart and can't seem to

get the from E-Shaft 19mm bolt loose.  I've used a 18" ½"drive breaker bar
and bounced on it but it just won't break loose.  Any Idea's, Heat / Hammer.
Thanks for any help.  T.W.

You need a really big breaker bar Tom. 3 or 4 feet long.
--
Paul Lamar

 The nut in the picture is a 52 mm one if my memory is right.  Is Tom

talking about the bolt on the front end?
Jim Brewer

Yep. My mistake.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org