Subject: E-shaft Bolt 19mm
From: ACRE NL
Date: 8/7/2002, 9:39 PM


Tom Webber wrote:


Help,  I'm in the process of pulling my engine apart and can't seem to get the from E-Shaft 19mm bolt loose.  I've used a 18" ½"drive breaker bar and bounced on it but it just won't break loose.  Any Idea's, Heat / Hammer.  Thanks for any help.  T.W.

You need a really big breaker bar Tom. 3 or 4 feet long.


We used a 3/4 " breaker bar and a long piece of pipe.  About 350 lbs
ft torque on it.

Royce


 
The AirCraft Rotary Engine NewsLetter.              Powered by
Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights
reserved.
http://home.earthlink.net/~rotaryeng/           
http://www.linux.org