Tom Webber wrote:

Help,  I'm in the process of pulling my engine apart and can't seem to

get the from E-Shaft 19mm bolt loose.  I've used a 18" ½"drive breaker bar
and bounced on it but it just won't break loose.  Any Idea's, Heat / Hammer.
Thanks for any help.  T.W.

You need a really big breaker bar Tom. 3 or 4 feet long.

We used a 3/4 " breaker bar and a long piece of pipe.  About 350 lbs
ft torque on it.

Royce

Beg borrow or buy an impact wrench.  You need at least one rated at 600 ft
lbs.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org