Subject: Venetian blind cowl flaps
From: ACRE NL
Date: 8/13/2002, 6:59 AM

There is a structural problem with these venetian blind cowl flaps
and a wide but short fore and aft horizontal rad
under the engine. The aero loads can cause bending and perhaps flutter.
You can make a fairly thick streamline shape and cover it with carbon
fiber and hinge it on the ends or you can use piano hinges and sheet 
metal. The piano hinges can be fastened to the rad itself to support 
the flaps along their leading edges as in this rendering of just
one segment.

This can be done by several thin strips of metal that slip in between
the fins. Not shown in this rendering. Also small holes could
be drilled in the piano hinges to safety wire them to the
back side of the rad.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

rad-flap.jpg