Snip

Since we are on the subject Fred here are  a few more gifs
of the TES variety.

I will outline what we are talking about.
There are four coolant sealing O-rings per rotor housing.
Two outer and two inner.
There are also four oil sealing O-rings per rotor. Two on each

side of

the rotor proper. These are located on the flanks of the rotor.
Two per side.

Snip

Thanks Paul. I had copied the o-ring stuff the last time you put it

out. Do we special

order from Creavey or did one of the other suppliers start to stock

our

special sizes

?

Fred O.

Don't know about that. Been talking to Dave Lemon at Mazdatrix.
Perhaps I should suggest to Jeff Chrysler at Creavey he make
up a 13B overhaul  kit. If enough people bug Dave Lemon he will add it
to the Mazdatrix catalog. Also Tracy is a potential distributor.

How many would buy a kit of TES O-rings when they rebuilt their
rotary? Roughly the same price as the Mazda kit.

Paul Lamar

I would be interested in a 20B o-ring kit, or One-and-a-half 13B kits.

;-)>

Mark

"Brian D. Cain" wrote:

I'd definitely be interested.  I'm in the middle of rebuilding a customer's
engine and could use a good price on four inner water jacket o-rings.  The
only contact I have right now is Hayes Rotary and I believe they're about a
$100 for four if memory serves.

B

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org