Subject: Motor mount advantages and disadvantages.
From: ACRE NL
Date: 8/14/2002, 6:53 PM


Todd Carrico wrote:

How would this compare to having the rubber bushings in the firewall?
Also, how is the fore of the engine supported (I am building a pusher)

I'd stay away from the "bushings-in-firewall" method because it appears
that
everything attached to the tubing (engine, radiators, etc.) will be able
to
move around more (relative to the rest of the plane), which might have
some
serious implications for fitting the cowling (ducts).

Russell Kent

Just as a data point, my installation is functionally the same as the rubber
bushing in firewall setup.  The rads and oil cooler are mounted to the 'all
moving' engine mount with very simple shock mounting scheme.  Never had any
vibration related problems at all in eight years of flying.  This probably
would not work with a Lycoming but the rotary's smoothness allows it to work
just fine.

Max's airplane is 'bushing in firewall' as well and works fine too.  If this
approach solves some major installation problems for you, it is worth
considering.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com


Max made his own out of rubber belting. Looks a bit too stiff for me.
I thought I took a picture but I cannot find it.

The softer the mounts the more it moves around the better the isolation.
On the other hand if it moves around too much you can get industrial Barry mounts
for about $8 each in a wide variety of sizes and stiffness (static load ratings).

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Barry-new-loads.gif