Subject: Venetian blind cowl flaps
From: ACRE NL
Date: 8/17/2002, 12:30 AM


Paul Lamar wrote:

There is a structural problem with these venetian blind cowl flaps
and a wide but short fore and aft horizontal rad
under the engine. The aero loads can cause bending and perhaps flutter.
You can make a fairly thick streamline shape and cover it with carbon
fiber and hinge it on the ends or you can use piano hinges and sheet
metal. The piano hinges can be fastened to the rad itself to support
the flaps along their leading edges as in this rendering of just
one segment.

Why not put the adjustable cowl flaps on the other side (engine side)
of the
radiator?  They'll restrict airflow just as effectively on that side,
and won't
be hanging out in the breeze.

Russell Kent

In theory you get a bit of thrust that offsets the cooling drag when
the hot air is allowed to squirt aft.

Paul Lamar


Paul,

  I dont understand your response? If the flaps are hinged at the trailing
edge and opened inward as Russell suggests seems to me they would still
provide the desired effect of dramatically increasing exit area during
climb and other high temp ops. Cooling drag isnt an issue when the flaps
are open regardless of how they are hinged and in which direction they
open. In cruise (where cooling drag is an issue) they'd be closed so they'd
have no effect on cooling drag.

I don't think that is what he said. He wanted to put them on on the other 
side (engine side) of the radiator? Never the less your idea has merit.

  One possible disadvantage I see is that with an outward opening flap you
essentially create a lip at the trailing edge of the cowl which in theory
should further reduce the pressure on the exit side of the radiator (when
compared to Russell's suggestion). But it seems to me that the inward
opening venetian blind style flap should be at least as effective as
Perry's totally open exit which was pictured here recently.

  I think its worth a try, just to avoid the structural issues you
mentioned. It also cleans up the airplane aesthetically. I'm going to give
it a try. Glad I hadnt cut those flaps yet. Thanks for the suggestion Russell.

  There's a guy based at Camarillo who flies a LOM powered RV3 with an
inward opening cowl flap. I'd forgotten all about it until Russell
mentioned this. As I recall, the owner said it was very effective.

Mike Wills

I am counting on the negative pressure behind the cowl flap.
As you mention drag is not an issue during climb.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org