Hi Mike Pellegatti, Welcome to the 6.5b gang
The single rotor engines weigh in about 135lbs bare, and depending on

the

redrive, we can expect about 200lbs total FWF. I'm on business at

present,

but over the next week or so I will be speaking to an RX7 racing

engineer

who makes 20b E shafts and has expressed an interest in making billet e
shafts for single rotor applications.He has N/A 13bs pumping out

260/270 HP

so 110-120hp at 6000rpm is a reasonable estimate for a single rotor

engine;

hereafter known as the 6.5b I will also be addressing other problems

such as

harmonic vibration, and dynamic balance . I access this newsletter at

least

once everyday so put your thoughts/worries/ideas online and  I and the

the

6.5b gang will try to answer them .Stay tuned for developments over the
coming week. Best Regards, Dave McC

Mike Pellegatti wrote:

Thanks

Mike Pellegatti
WildVisions, Inc.
Phoenix, Arizona
623-516-1975

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org