Mark Steitle wrote:

Paul,
Here's the reply from McNichols Co. concerning the smallest possible radius for their 2" square
tube bends.  The material is 304 SS.
Mark

]********************************************************************

Subject: Re: Quote Request for: msteitle@mail.utexas.edu
X-Mailer: Lotus Notes Release 5.0.10  March 22, 2002
From: Rick_Wan@mcnichols.com
Date: Mon, 19 Aug 2002 10:34:17 -0400

Mark,

The smallest radius for 2" Square tubing would be a 8" center line radius.
The material would be a 304 SS material in a mill finish.
Also, these are not a stock item and you would be looking at a 15 day lead time for them to be
manufactured.

Is this something that you would like for me to continue in pursuing with?

Thanks,


Rick Wan
McNichols Company

Thanks Mark.
Not too useful for a pigtail muffler. Might be OK for tail pipes.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org