These photos are 3 years old but the engine cooling installation has not changed except for a 160F
thermostat. .The change in thermostat from 190F to 160F has not caused noticeable change in
coolant temp. The cap is standard Mazda at 15 psi. I would use a higher pressure cap if I could
find one easy and fast.
That exhaust and muffler arrangement decreased my static rpm by about 400 rpm. I never even flew
with it.
I now use two 2" tubes, the shortest one being 31" long before joining together in a
small cylindrical pot where my O2 sensor is located. Have to live with the noise ,until I can
afford a SS Spintech type muffler
Yvon Cournoyer.
Where are the cooling rads mounted Yvon?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org