Subject: Bob is going to like this one.
From: ACRE NL
Date: 8/22/2002, 9:16 AM

Since Bob already has a turbo exhaust manifold this may be the
best solution for his purposes.

The down side is it is heavy and complicated. The loads are very
high in the motor mount tubes so they must be large in diameter.

Also the vibration isolation is not as good.

The water pump may have to be modified to clear the motor mount
tubes.

I still like the turbo aft of the intermediate firewall.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

seawind-layout9.jpg