Mark Wrathall wrote:
Boeing is having a large auction at Auburn,Wa. wed the 28th, Lots of

big

expensive stuff but also several Bridgeports,Tree,Lagun
machines as well as several lathes.

Here is the catalog (warning, big PDF). There are some nice tool

cabinets.

http://greatamerican.com/apcm/Articlefiles/53-Boeing%20Page%20Set-up.pdf

Mark

Probably a real good place to buy used machine tools.
The entire area is probably depressed as far as machine shops go.

 Paul Lamar

 Thanks for the info even if it cost me lots of money, are you going, if

so you or any other

rotary people can call me on my cell phone there at 360-253-0703.
 Do you know if its at the surplus building.
 Ken Welter

Mark wrote:
The Location is:
The Boeing Company, Auburn Plant, Ellingson Road, Auburn, Washington
DIRECTIONS

>From Seattle Airport: Take I-5 South to exit 18 East; Take 18 East to 167
South. Take 167 South to Ellingson Rd.
East (Pacific Algona exit) go approx. 1 mile to plant on left. Enter thru
turnstile gate in parking lot on Ellingson Rd.
Buildings 17-56, 17-58 & 17-65.

Unfortunately I won't make it as I live about 9300Km away in Vienna Austria,
and I doubt I could get any of this stuff through the x-ray machine at the
airport :)
Mark Wrathall

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org