I still need the dimensions of the turbo exhaust manifold.
Also how far back of the spar is the trailing edge of the wing?
Do you have a top view of the airplane?
This is not cast in concrete as there are some other motor
mount options that will work. One trick is to freeze larger Barry 22003
rubber mounts and drill some holes in them to make them softer. Then drill
the
5/8 inch mounting bolts to make them lighter :-) Then move the mounts
inboard to give a more pointed cowl.
BTW I can give you loft lines so you can carve the cowl when
you see something you like.
Paul Lamar
WOW! Paul these 3D drawing are great! I really like your mount. The bottom
two tubes are going to be mounted to the Cozy gear bolts and the two side
tubes are bolted to the inside wing bolts. It's going to be strong and I
have the whole firewall to mount stuff without any tubes in the way. The
firewall to prop hub needs to be 41" for the CG and on a canard this moves
the prop aft away from the wing wake. Pushy Galor was running a 12"
extension! Bulent and John figured out the Cozy CG on this web page:
http://kgarden.com/cozy/chap23b.htm
The trailing edge of my wing is approx 24.5" aft of the firewall at the
inside wing mount then it will sweep in and aft to a point 6" behind the
Klaus' spinner.
My HKS exhaust manifold with TO4-H turbo sticks out 11.3"! The end of
the compressor inlet is approx 8" forward of the forward exhaust stud.
I really like the aft end of Charlie Airesman's EZ and plan to make my
bottom cowl and exhaust exit the same way. It looks like a jet!
I have your 3D drawing as my back grounds on my computers and I'm going
to print and hang them in the shop to inspire me :) I owe you big time!
SQ2000 top view attached.
Many thanks,
Ernesto
Too bad you already have that HKS manifold. This looks like a better
place for the turbo. But no matter, we can go to the Seawind type
mount and accommodate the HKS. Up to you. Jerry Hey might build a
SS turbo exhaust manifold for you using RB Wagner .065 wall SS bends.
He does not live far from you.
http://www.rbwagner.com/
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org