Don Dunbar wrote:

Hi Paul,
I have attached the Mustang 2 DWG that was requested.
I will winzip this as DWG file do not transmit well.
The DWG is Acad LT win95. Are you still using version 12.
Did you try the Vibrant Graphics package.
Paul as I see it the only load on the thrust washer will be no load back lash.

What do you think!
Don Dunbar

Is this the drawing Don? This is an old version you sent me a long
time ago. The one you just sent will not load in ACAD R12.  I am still 
using ACAD R12 when I am not using Rhino. Mostly Rhino lately. Never got 
around to trying Vibrant Graphics.

If this is the drawing I need the distance between the hard points on
the firewall. I can scale most of the other dimensions from this drawing.

Wait a minute! I just had an idea.............

OK I loaded it into Rhino and saved it as an ACAD R12 drawing.
That worked. I then loaded it into ACAD R12 and dimensioned it. 

Here are the dimensions. 3D shortly. Turbo or non turbo?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org