Don Dunbar wrote:

Hi Paul,
I have attached the Mustang 2 DWG that was

requested.

I will winzip this as DWG file do not transmit

well.

The DWG is Acad LT win95. Are you still using

version 12.

Did you try the Vibrant Graphics package.
Paul as I see it the only load on the thrust

washer will be no load back lash.

What do you think!
Don Dunbar

Is this the drawing Don? This is an old version you
sent me a long
time ago. The one you just sent will not load in
ACAD R12.  I am still
using ACAD R12 when I am not using Rhino. Mostly
Rhino lately. Never got
around to trying Vibrant Graphics.

If this is the drawing I need the distance between
the hard points on
the firewall. I can scale most of the other
dimensions from this drawing.

Wait a minute! I just had an idea.............

OK I loaded it into Rhino and saved it as an ACAD
R12 drawing.
That worked. I then loaded it into ACAD R12 and
dimensioned it.

Here are the dimensions. 3D shortly. Turbo or non
turbo?

Paul Lamar

Paul,  I'm doing a mII with a  stock 91 turbo.  Not

far enough along that i need it now, but sure would be
nice to see your motor mount scheme for it. Thanks Jim
Coffman

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org