> >Jerry,

 >
 >This incorporates Butch's idea.
 >
 >First one is peeking around the firewall from the left
 >side. As you can see there is plenty of clearance.
 >Also clears the cowl by about 2 inches.
 >
 >If this does not work out a tuned tang muff will also fit.
 >
 >BTW How would  you like to start on the dyno?
 >You could test some muffler ideas for both HP AND sound.
 >
 >Paul Lamar

 I would like to see the rest of the engine mount.   It does look good.
 RE: the dyno.  We certainly need one.  I do not have the time to
 tackle another project right now.  Send me another set of  dyno plans
 and I will get 's estimate......Jerry

Does Danny weld?

Paul Lamar

Danny has full service welding capacity.   Jerry

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org