Just for the heck of it I exported the Rhino rads compared rendering
as a three view drawing to ACAD R12.

This is what I got. Probably take me ten times longer
in ACAD to just make the three views as it took me in Rhino.

Paul Lamar

Hi Paul,
The two attached files look like the Mustang 2.
You got a handle on Rhino real quick and your work looks very good.
I have moved away from Auto-cad as I also found it to slow and not
user friendly at all.
Design cad is so much faster and user friendly that I had Nidia using
it in a few hours where she is completing a 2D house plan.
This program will open all Auto-cad files DWG and DXF.
The large plotter I have at work uses the ascii files to run.
My friend that makes these profile cutters and CNC machinery is using
the ascii files from Design Cad.
In the past we would import Autocad file and then convert them in
Design Cad.
Paul I have an old Chinese miller that I am going to convert to a high
speed router with CNC control using the same system.
Thank you for the 3D Rhino profile that you did.

The tip on using the Ritlabs e-mail program was good, The Bat is the
best I have used.

--
Best regards,
 ddunbar                            mailto:ddunbar@echidna.id.au

You could do some aluminum sand casting patterns for me on that 3D router :-)
I can send you all sorts of formats from Rhino.

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org