kevin wrote:
this is the second Yaw turbo set-up I've seen now that incorporates a large
360 degree loop between the engine and the turbo. Should I assume this is
for a bit of cooling? His single rotor also has a loop rather than running
straight to the turbo. Why? Kevin
You will have to ask Paul Yaw.
http://personal.riverusers.com/~yawpower/
Let us know what he says.
Paul Lamar
My recollection is that Paul favors tuned exhausts and intakes even in
turbo applications. He was quite proud of the fact that the 2 rotor shown
was producing over 260HP at about 6psi of boost (these numbers off the top
of my head; might not be exact but pretty close). The loop is to get the
desired primary length while keeping the engine reasonably compact and
keeping the turbo above the oil pan for sufficient oil drain back.
Mike Wills
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org