>   The runners are .065 304 SS.   The muffler is .075  304 S that a
 > sheet metal shop sheared for me.  The muffler cost $12.00.
 >
 > We will see how noisy it is.  I am really hoping that it will be
 > sufficiently quiet.  In the even it is not, the  45º down tube can be
 > spin teched with drop in baffles.
 >
 > I set aside September for the exhaust system so it looks like I get
 > three weeks off.     Jerry

1. It looks like the entire weight hangs off the exhaust manifold flanges.
When the material gets hot, will it have sufficient strength? Or am I missing
something.

2. You are using 304 SS. Others have recommended 321 SS. I don't know enough
of the differences between the SS's, can someone comment on their relative
applications and limitations?

Bill Schertz
KIS Cruiser #4045

321 SS is better but cost is an issue. One can always trade a bit of weight 
for cost. Instead of .049 321 SS go to .065 for 304 SS.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site. Copyright 1998-2002 All world wide rights reserved.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org