Hello Paul,
I have attached two Cozy Rhino models that I imported from Prolines6
as IGES files, Render work's well on these files.
When you draw in Rhino how do you change their files to IGES to
render.
I have also imported DXF files and don't know how to convert for
render.
--
Best regards,
 ddunbar                          mailto:ddunbar@echidna.id.au

To answer your questions.
#1. When you are in Rhino you just click on render.
No iges files involved.

I have found that Rhino will not render if it is not a IGES file on
import
DD

That is interesting. I was unaware of that. I guess DXF cannot
tranfer 3D info. PL

#2. Nor do I. I suspect it cannot change a 2D drawing DXF file to 3D.
DXF seems to be the worst way to interchange files.

I have imported a 3D DXF file and tried to render without any luck.
DD

Here is a zipped step file for Monty's 13B engine drawing.
See what you can do with this.

Paul Lamar

I will have a go at this in the morning.
Regards Don

I know iges works as I imported a Rhino iges file into Solid Works
and that rendered fine in Solid Works.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.