"Brian D. Cain" wrote:

Friends, I just built a friend of mine's 13B 4-port turbo motor

using

Tracy's
nifty tension bolt squawk modification (heat-shrink tubing).

Inserting the

tension bolts made for a nice, snug fit.  Adding some silicone RTV

around

everything ought to help out a bit more.

Thanks for the advice, Tracy.  Should hold this engine together

nicely.

B

People store things in their subconscious and then think they
invented something when it surfaces as an idea :-)
Now we have computers and search engines so the first person
that sends it to the internet is the real inventor :-)

Paul Lamar

*******************************************************************

WHOA!!.........It makes no sense using RTV in addition to the SNUG fit

Shrink

tubing.
As per very extensive discussions on the ACRE NL, the captive RTV

develops

tremendous hydraulic pressure while curing which can cause cracks in the
housings.........Isn't this the reason why one should sparsely apply a

bead of

RTV in a coarse spiral pattern to the bolt? ....... Or am I missing

something

here??               Butch

"Brian D. Cain" wrote:

Butch, I didn't make myself clear enough when I noted the Sillycone
RTV part:  With clarification, I mean using a bead in a spiral pattern
around the both from threadding to bolt head except for the heat-
shrunk wrapped portion.

B

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.