I would
> like to hear a description of the throttle response of PPorted race
> cars. Maybe Lynn, has experience with this. I would rather have
> the EC-2 than peripheral ports , if it comes to that, but I really
> want both. PP's are the best way to add hp, in my opinion. It would
> be a huge boost for the rotary movement if a do it yourself PP design
> that is compatible with the EC-2 can be developed.
> Jerry
I have one Factory periphery port engine in my old car with two 44mm
venturies
in a Webber 48 IDA. The runners are the same length as the side port
(bridge
ported) engine, about 8 inches to the butterflies. There is no throttle
lag in either
engine, coming off idle. The idle speed is 2,000 RPM. A bit high for
aircraft use.
I don't think throttle lag would be a problem in any case. More a
function of off
idle mixture control than runner length. Street car stuff is all off
idle performance.
We have a bunch of accelerator pump stroke and no problems at all. Most
of the
time we are at 7,000 RPM or more when we open the throttle. Even if
there was
some hesitation we couldn't detect it. In the aircraft, the PSRU at
2.17:1 you can
have the idle at 1,000 RPM without dragging the brakes much on the
ground. So
the throttle response off idle will be quite good and seldom used in a
way that
would expose a response problem. On final you could carry quite a few
extra
RPM without generating a great deal of thrust. So if you need to go
around, just
roll on the power and go. You already have enough RPM to obscure any
hesitation. I think the hesitation "problem" is a red herring. I would
mount the
throttle body at the end of the runners and be done with it.
Lynn E. Hanover
Hesitation is one thing but idle stability is another.
They are not really related.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.