Hesitation is one thing but idle stability is another.
They are not really related.
Paul Lamar
I agree. Lynn, in a Van's RV-x with a fixed pitch prop, anything over
about 700
prop rpm will cause airliner like approaches & hundreds of feet of float
in
ground effect. Can a p-port idle under 1500 with no danger of quitting
either on
its on or with sudden throttle opening? I would consider *slight*
hesitation
acceptable. Someone (was it you?) mentioned cutting the p-port to match
the side
port timing. Shouldn't that solve the overlap problem Paul mentioned in
a recent
exchange about this issue?
Charlie England
Charlie,
I throttle back to around 3200 engine rpm for my base+final portion of
the landing pattern. This gives me a prop rpm of around 1500 which is what
I used out of habit (landing Warriors and Cessnas) for my RV. I generally
come in high enough for an engine out landing and don't find it a problem to
set the aircraft down on the numbers. I may pull the throttle back to 2700
rpm when I hae the field made over the fence and to idle on touch down.
I think that Tracy and I both have our idle set around 1800-2000rpm and
that does not appear to be any problem. The RV is a little hard to get
rolling with those small tires and on grass even harder. I've never
encountered any problem having to ride the brakes to keep my ground taxi
speed down. FWIW
Ed Anderson
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.