Charlie Kuss wrote:
>
> >snipped
> >) what's a "dash pot?"
> >
> >A dash pot is like a car "shock absorber" only much smaller. PL
> I'd like to expand on Paul's answer here. Dash pot's were used on many
high performance cars in the 1960s. The dash pot acts like the cylinder
attached to the top of your home's screen doors. It prevents the throttle
from slamming shut just as the damper cylinder on a screen door prevents
the
door from slamming shut.
> Some large displacement engines will develop a "rolling" idle, if the
throttle is snapped rapidly shut from full or part throttle. The dash pot
simply slows the closing of the last 1/4" or so of the throttle.
> Charlie Kuss
> Who foolishly threw away the dash pot on his 1967 Buick Gran Sport. Ah,
who needs this, with this really cool Holley double pumper carb? WRONG!!!!
I was thinking of the fast idle dashpot on my 72 Toyota. It was electric
and if the throttle was dumped from high revs it would be energized and hold
the idle speed up for a few seconds to reduce manifold vacuum. When energized
it was one length, and when unenergized it would be shorter. So you could
have a two speed idle system. One for landings, slow to reduce float, and a
higher speed for everything else.
I talked to Paul Yaw and Daryl Drummond yesterday at Mid Ohio. Paul has an
engine in one of the GT-3 cars. Daryl has engines in everything. Paul said he
is getting 260 HP from a 12A with two 38mm chokes. [1.5 inch]
I asked Daryl if that
sounded about right. He said 260 should be doable. The street ported 13B is
now up to 237 HP. It just keeps getting better.
Lynn E. Hanover
Lynn E. Hanover
At what RPM's Lynn?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.