Subject: Peripheral ports & EC2 use.
From: ACRE NL
Date: 9/18/2002, 7:22 AM


Charlie Kuss wrote:
 >
 > >snipped
 > >) what's a "dash pot?"
 > >
 > >A dash pot is like a car "shock absorber" only much smaller. PL


 > I'd like to expand on Paul's answer here. Dash pot's were used on many
high performance cars in the 1960s. The dash pot acts like the cylinder
attached to the top of your home's screen doors. It prevents the throttle
from slamming shut just as the damper cylinder on a screen door prevents
the
door from slamming shut.
 >  Some large displacement engines will develop a "rolling" idle, if the
throttle is snapped rapidly shut from full or part throttle. The dash pot
simply slows the closing of the last 1/4" or so of the throttle.
 > Charlie Kuss
 > Who foolishly threw away the dash pot on his 1967 Buick Gran Sport. Ah,
who needs this, with this really cool Holley double pumper carb? WRONG!!!!


  I was thinking of the fast idle dashpot on my 72 Toyota. It was electric
and if the throttle was dumped from high revs it would be energized and hold
the idle speed up for a few seconds to reduce manifold vacuum. When energized
it was one length, and when unenergized it would be shorter. So you could
have a two speed idle system. One for landings, slow to reduce float, and a
higher speed for everything else.
snipped

I'm unfamiliar with the use of this device in your Toyota. GM cars used something similar in the 1970s & early 1980s. It's called an electric idle step up solenoid. It was used on many cars with air conditioning. It opened the throttle slightly to eliminate a drop off in the idle speed when the air conditioning compressor was engaged. They are cheap, easily adjustable and still available via the aftermarket.
Charlie Kuss


 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.