Subject: Sandwich plate between engine and oil pan.
From: ACRE NL
Date: 9/19/2002, 9:22 PM


If you insist on using four motor mounts at the
four corners of the engine and you are going to make a
new oil pan this is a much lighter weight and much
cheaper way of doing it. I call it the Schertz
beam after the inventor Bill Schertz. The oil pan
must be designed accordingly of course.

Bill, do you have another pic? The last one is a bit out of focus.

Paul Lamar


-Ron Freier wrote:

Paul,
How does this "Schertz Beam" mount to the block? I must be missing
something.?

Ron Freier
Vision w/ 13B- 

It uses longer front oil pan bolts to hold it in place. These bolts
are not really subjected to very much load as the engine is resting
on the beam. The high six G download you get in a severe pull up
or a hard landing do not stress the bolts.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.