Subject: Sandwich plate between engine and oil pan.
From: ACRE NL
Date: 9/19/2002, 9:26 PM


 If you insist on using four motor mounts at the
 four corners of the engine and you are going to make a
 new oil pan this is a much lighter weight and much
 cheaper way of doing it. I call it the Schertz
 beam after the inventor Bill Schertz. The oil pan
 must be designed accordingly of course.

 Bill, do you have another pic? The last one is a bit out of focus.

 Paul Lamar

------
This one shows the other end of the beam, withthe engine sitting in place.
I will have to try to take another closeup of the end with the oil cooler
outlet end to get a non-fuzzy one. I have to borrow a digital camera, so may
be a couple of days.

Bill Schertz
KIS Cruiser #4045

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.