Subject: 2.85 drive HP curve.
From: ACRE NL
Date: 9/20/2002, 7:04 AM


I also will state again - that I have not seen dyno data that supports
increased horsepower at 7000 rpm for a modestly modified
13b engine. Vance J


In the unlikely event the HP is increasing in some strange function
do you really suppose it cannot generate more HP at 7000 RPM if
it is generating 180 HP at 6000 (worst case scenario) and
270 HP at 9200 RPM? :-)

VJ - I admire your optimism. The rotary is not a magic straight
line engine. Power does not automatically increase linearly
with rpm. All the real dyno data on stock, or reasonably modified
engines shows definite breathing limited roll off on the power
curve at about 6500. Even the fairly radically ported Powersport
engine curves show this  effect. Mazda was not deliberatly hiding
horsepower from you just waiting for you to rev it up. There is
no free lunch - with the full race porting for those high racing
power and rpm values you are giving up power and efficiency
at the more normal operating levels. I will say it again
"I have not seen"  "show me the Money!!" (ie the real dyno
data on an engine that you would fly over wide bodies of water)
All these things are equally true of the power greedy piston
engine converters - that claim higher power levels than
the auto makers advertizing department. Some of them can
even show real dyno data - they call them "pulls" which
probably means that you can only stay there a second or two.
I admire you for your world class pessimism on the rotary.

Well Lynn already stated that a street ported 13B was generating
237 HP at 9200 RPM. Quote:

 I talked to Paul Yaw and Daryl Drummond yesterday at Mid Ohio. Paul has
an engine in one of the GT-3 cars. Daryl has engines in everything. Paul
said he is getting 260 HP from a 12A with two 38mm chokes. [1.5 inch]

I asked Daryl if that
sounded about right. He said 260 should be doable. The street ported 13B
is  now up to 237 HP. It just keeps getting better.
 Lynn E. Hanover

Mike Pinnigar is on the pole in a carbon fiber RX-3.
This may change Thursday PM when we have our last qualifying session. I think
Pinnigar must have close to 270 HP and he leaves nothing on the track. An
RX-3 ahead of all of the Nissans and Toyotas. It gets better every day.
Lynn E, Hanover

Here are the ports openings for a street port. This is not a peripheral
port nor is it a bridge port. I would hardly call this radical porting.

Tracy estimates about 180 HP with a mild street port at 6000 RPM.
Let us assume for the moment it is worst case linear between 180 HP at
6000 RPM and 237 HP at 9200 RPM. What is the HP at 7000 RPM?

My guess is; the HP curve between 6000 and 9200 looks something like the green
line giving over 200 HP at 7000 RPM. Vance is saying it looks 
like the red line. You decide.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.