Paul,
> How does this "Schertz Beam" mount to the block? I must be missing
> something.?
>
> Ron Freier
> Vision w/ 13B-
It uses longer front oil pan bolts to hold it in place. These bolts
are not really subjected to very much load as the engine is resting
on the beam. The high six G download you get in a severe pull up
or a hard landing do not stress the bolts.
Paul Lamar
---------------------------
The holes through the beam have tubing that passes from the bottom side to
the top, and is welded to the beam to provide "crushing" resistance so that
you can torque the oil pan bolts appropriately. Does require the
construction of a new oil pan to provide clearance for the beam.
Bill Schertz
KIS Cruiser #4045
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.