Subject: 20B overhaul questions
From: ACRE NL
Date: 9/22/2002, 8:36 AM


Fred Vandeman wrote:

I'm using the Turrentine video and it would appear that the 20B does not
have/use the oil bypass thermostat???  Or is it in a different location
than under the front eccentric shaft bolt?

One more.......I want to bypass the eccentric rotar oil check ball and
spring.   Do I want to use the same size Weber jet (#200) as the tape
suggest for the 13B ?

Thanks
Fred

Correct, there is no thermal bypass valve in the 20B.
As far as the oil jet mod, just be sure that you know exactly why you are
making the change.  Just because the car racers do it is not a good reason
to make a change.  If you do the oil jet change, the 13B size should be good
for the 20B too.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.