> > > This one shows the other end of the beam, withthe engine sitting in
 > place.
 > > > I will have to try to take another closeup of the end with the oil
 > cooler
 > > > outlet end to get a non-fuzzy one. I have to borrow a digital

camera,

so
 > may
 > > > be a couple of days.
 > > >
 > > > Bill Schertz
 > > > KIS Cruiser #4045


 > Is that oil cooler blocked on the back side by the Schertz beam?
 > Terry Adams

No, the oilcooler sits *under* the beam, mounted to the tripods.  The back
side of the oil cooler is unobstructed except for an area of 6" x 1/2"  in
the center, where the oil pan front is within 3/4" of the beam. Otherwise it
is totally unobstructed.

Bill Schertz
KIS Cruiser #4045

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.