Are you coating the side housings with the CBX.

  Ken Welter

No Ken, I am not using CBX at all. I am using a similar material for the rotor faces called PISTON
COAT from NIC, but not CBX. The side housings are not necessary to coat due to the nitride process
but if one wanted to they could use a dry film lubricant like WSX on them with good results.There
are no clearance problems with these materials.
Doug Mueller
RX-6 13BT
N900DM
Henderson, NV

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.