Hey Rick, I am currently coating my motor. I have had extensive experience

with these coatings in

many engines. So far the 13B Turbo motor will be together in about 3 weeks for

break in. Once it

is broken in I will finish the coating of parts and dyno testing will begin. I

am currently using

Techline coatings except on the rotor faces. I used Techlines' CBX pretty

religiously but found a

new coating for the rotor faces from a different manufacturer that does not

have any aluminum in

the coating nor does it have any ceramic. It lowers the heat retention. It

sprays thinner and

there is no clearance problems with the materials. I will keep all informed!

       Who is the masked man who posted this?

     Kelly Troyer

Sorry Kelly, I forgot to put a name to the info.
Doug Mueller
RX-6 13BT
N900DM
Henderson,Nevada

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.