Subject: LAEV prop mold photos
From: ACRE NL
Date: 9/29/2002, 7:19 PM

kevin wrote:

I stopped by and saw Perry on saturday.  I was surprised to learn that his
blades are a simple cold layup of fiberglass, no prepreg, no ovens.
Pictured is the mold for the lower prop skin.  He will make another mold for
the upper and then bond the two together with layers of bias fibric.  A foam
core will fill in the lower part of the blade where it passes thru the steel
hub ring.  This blade will measure 72" and you can see that it has a pretty
wide cord to it.

Thanks Kevin. 

We are moving along on this prop project slow but sure.
The trailer is here thanks to Butch and the dyno/test stand
will be done on Thursday. Anybody have an engine in 
Southern California we can use as a test engine. Want to find
out how much power your intake and exhaust system can generate?

My turbo engine will still be awhile as I am a bit behind schedule
on the cast intake manifold. The manifold is coming but it will be a few more
weeks and then I have to do an intercooler.

The dyno/test stand will accept a complete firewall forward package mounted
on a sheet of 3/4 plywood simulating your firewall. If you have
catch can or ign coils for example, mount them on the plywood along
with your motor mounts and engine ready to run. We can bolt the whole works up 
to the plywood "firewall" on the dyno test stand.


Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.