Subject: 40% less fuel?
From: ACRE NL
Date: 9/30/2002, 9:41 AM


Paul wrote

This is a auto translation from a German site.
40% less fuel???? Now would not that be something?

Paul Lamar

**********************************************************************
**
With the Mazda Renesis wankel engine, the Rx-8, from the Ackergaul now
nevertheless still another
running horse became. In the current version the Renesis brings wankel
engine 250PS with 8500 Upm.
Der Renesis wankel engine of
the Mazda Rx-8 is to use 50% fewer lubricating oil and 40% less fuel
than
its
predecessor. In addition it is to fulfill the exhaust standard
Euro-4. The
side discharge opening
became only possible by ceramic(s) haven liners, which are cast in
into the
discharge opening. The
bearing surface consists now of a chrome molybdenum alloy.

Molybdenum is not one of the few materials with those chatter marks
arises,
in addition it has
excellent running properties.
*********************************************************************
Mark wrote
Hi Paul, if you send me the article or URL, I'll translate it
properly. (My
wife is a German/English/spanish translater and those babelfish
translations
give her that warm fazzy feeling of job security :)
Mark Wrathall
www.rotary.microcosman.com

******************************************************************
http://www.der-wankelmotor.de/Wankelmotor/wankelmotor.html
-Wankelmotors, wohlgemerkt als Automotor.
Mit dem Mazda Renesis Wankelmotor, des RX-8, ist aus dem Ackergaul
jetzt doch noch ein Rennpferd
geworden. In der
jetzigen Version bringt der Renesis Wankelmotor 250PS bei 8500 Upm.
.Der Renesis Wankelmotor des
Mazda RX-8 soll
50% weniger Schmieröl und 40% weniger Treibstoff als sein Vorgänger
verbrauchen.
Außerdem soll er die Abgasnorm Euro-4 erfüllen. Der Seitenauslaß wurde
erst durch
Keramikportliner möglich, die in den Auslaß eingegossen sind. Die
Lauffläche besteht jetzt
aus einer Chrom-Molybdän-Legierung. Molybdän ist einer der wenigen
Materialien bei
denen keine Rattermarken auftreten, außerdem hat es ausgezeichnete
Laufeigenschaften.-

*****************************************************************

That is hard to believe!  That would take me from 18 MPG to 30 MPG.

Hans Conser

That could be in automotive use. Cars run at such low power levels.
If you move up on this curve to the left you see that the 
BSFC goes to pot real fast at low power levels. It is possible 
to reduce a BSFC from .55 to .43 at low power that would be a 22% 
reduction. 

Now if they got it down to .38 from .43 by running 
it super lean at low power levels that would be .38/.55 
or a 31% reduction.
 
0.38 from 0.43 for our use would be only be a 12% reduction
in fuel consumption for cruise. Hardly what I would call a big deal.

Now if you throw in the silly EPA California driving cycle
where idle time is a major feature they could be looking at 
a 40% reduction. The situation is even more unrealistic for 
the European driving cycle where in the real world they drive 
for as much as 15 minutes at up to 150 MPH.

To really score on the stupid and unrealistic environmental driving 
cycles you need an engine that shuts off at stop lights and auto starts 
when you hit the gas.  Perhaps Mazda is planning that for the 
RX8.

Paul Lamar

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.