Subject: Build a dyno into your gear box.
From: ACRE NL
Date: 9/30/2002, 12:13 AM

This measures torque by measuring the reaction
load of the spiral sun gear in the Ford planetary.
Will work with Tracy's gear box or a Ross gear
box. If you have a Ross that needs a thrust bearing
you might want to build this in as it will cost very
little additional. Also this idea is used by most
turbo prop engines to measure torque and hence HP
when the RPM is known as it usually is.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.