Jerry Hey wrote:

Paul, there is plenty of room in the lower part of the nose bowl on
each side for a Setrab  (8.25 x 7.5 x 2)  These can be mounted on
brackets welded to the lower Barry Mount assembly.  They will be fed
from the corners of the under-the-spinner inlet.   When  you get  a
chance, please take a look at it in Rhino.    Thanks,  Jerry

OK.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.