Ok, so if the e-shaft is stationary and the housing spins, how is the induction and exhaust handled? I'm sure there's a solution, but how complicated? Was it the Rhone engine back in WWI that turned while the crankshaft remained stationary?
Brian Trubee
Yes.
Only one or two true Wankels were ever built. One had a displacement
of 7.6 cubic inches and generated 28.4 HP at 17,000 RPM. The rub was
getting the fuel and air in and the exhaust out as well as spark plug
placement. These problems were so severe NSU redesigned it to its
present form.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2002 All world wide rights reserved.