Subject: turbo: HP -vs- RPM
From: ACRE NL
Date: 10/6/2002, 1:50 PM


You are going to have to slog through the Hugh MacInnis book and work
all this stuff out for yourself. Compressor maps are available
from Garrett. Some are in the turbonetics catalog. If you get
some maps that I don't already have please
send me a copy. You can get just about any
HP you want out of a turbo 13B. The HP curve you get will
depend on the turbo you choose. You will not be far off if
you choose HP as a straight line function of RPM.

In addition people with a lot of experience sizing turbo's tell
me it is not an exact science. You do the best you can and you
get whatever you get.

Paul Lamar


Paul, Thanks. Inexact science is the operative word here. Even Greg said "just buy one that looks
close and then change whatever part makes it closer to what you had in mind after you have some
data.

There are plenty of turbo "experts" out there but when talking to vendors mention experimental
aircraft and the wall goes up... So, experts are useless if they won't talk to you.
There is a real good reason I don't have a turbo yet, at this point I'm ready to give in and just
order from Turbonetics because everyone else wants to "help" you; ie, they want to know the year
make and model of car, how much groceries you carry, is your brat going to use it for street
racing etc.

Now add to that you are not going to use a wastegate and they really think you are stupid.
You can't exactly begin a conversation about your 13B powered airboat and then ask them how that
data applies at a cruising altitude of 10,000 ft can you?
Understood, nobody said this was easy, but they never said what a pain in the ass it would be. I
know exactly the turbo I want to "start" with but finding it at a non-Turbonetics price is going
to be an adventure.
...Chrissi

Cozy Mk-IV 13B-   (turbo wannabe)
www.CozyGirrrl.com
Chrissi@BlueMountainAvionics.com

Much of that is why I am using the stock 89 to 91. A lot of the design
work is done. Mecanair is taking the same rout. As Ed Anderson pointed
out there are ways of increasing the boost. Here is what is called
a hybrid. Part stock and part TO4. This is a somewhat painless way 
of doing it as the turbine section is the most problem. What you are 
changing here is only the compressor section. My intake manifold
is design to accommodate the stock turbo.

I think one of the keys to understanding what is going on is plotting
a starting point of the engine air requirements on the compressor map. 
In other words at such and such a boost (which you get off the map) 
and at such and such engine RPM you have such and such HP or engine air requirements. So on and so
on.  Chicken and egg iteration! 

You try to get the curve 
to stay in the efficiency sweet spot of the turbo map. You could do
this with a spread sheet or BASIC program once you entered the
compressor map coordinate data into the computer. If someone wants
to do that and send it to me I will see what I can do.

You could also call Paul Yaw and Jim Mederer at Racing Beat for their 
advice. Both have done aircraft turbo's. Jim works with a turbo consultant 
on some projects. I met him in Jim's shop awhile back but forgot 
his name.

If you get your engine out here we could check it on the dyno
no charge.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.