Subject: Auto Conversion Judging Was Re: Evergreen AL Fly-in
From: ACRE NL
Date: 10/9/2002, 7:10 PM


 > One concern I have about this catagory is would it then absolve
judges from
 considering an auto conversion in judging for Grand Champion or
other awards
 with "conventional" aircraft. There are those who "have issues" with
 conversions and would consider them a safety issue and therefore not
 qualified to compete against a purebred.
 I'd prefer not to see conversions get segregated at shows. If
anything we are
 doing more to embody the spirit of experimental aviation than the
quick build
 exactly to plans route that is so common today. There is nothing
wrong with
 the simplified kit planes; everyone has their own comfort level and
 abilities.
 Just my 2 cents.
 ...Chrissi


Very soon,  rotary powered  aircraft will be OUT PERFORMING
conventionally powered  aircraft by such a large margin that those
airplanes may require will require a special "traditional" sticker.
It will be hung on the prop like a scarlet letter.  The judges will
just pause briefly to give them a nod, maybe say something like
"Pretty" and then move on to the real machines.     Jerry

Chrissi, I understand your concern, but lets face it - most folks who do
auto conversions are focused on more fundamental concerns than aircraft
finish - like staying in the air and flying behind a safe power plant.  I am
convinced that it is unfair to compare the two categories - two different
objectives and two different mind sets.  While I certainly believe that
someone with the dedication to stick with an Auto Conversion can certainly
produce a "Show quality" aircraft, I don't think that is what most of us are
after or focused on- but I could be wrong about that.  So I am looking for
input on how to judge an Auto Conversion..

In fact, I told one of the judges that my aircraft was a platform for my
auto conversion project - perhaps not prudent to say, but truthful just the
same. Given the problems that seem to crop up weekly if not daily regarding
Lycomings, I think a time may come, as Jerry indicates, when the "Smart"
people will be flying behind (or in front of  - in your case) Rotaries. My
0.02 worth.

Ed Anderson

My friend Tracy Saylor who happens to have the fastest RV6 in the world
just took his, rebuilt by LyCon, Lycoming O-360 engine apart after only 120 hours. 
The wear on the exhaust valve stems and guides was beyond overhaul spec. 
New Lycoming exhaust valves are now $400 EACH!
  
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.