Subject: Turbo fuel pulse damper? press regulator?
From: ACRE NL
Date: 10/9/2002, 3:14 PM


I assume the one on the left is the fuel pressure
pulse damper. Correct? are you not running that Tracy?
Mine looks like it is getting ready to fail as the plastic
has turned yellow and has become brittle.
The pressure regulator has an input for manifold pressure
it looks like. Correct?

Paul Lamar

I just popped the plastic off and the little screw fell out.
No wonder this turbo engine was not running right for the guy I bought
it from for only $300 :-). He tried to find somebody to fix it for
years :-).

Paul Lamar


-Barry Gardner wrote:

Paul,

That little screw popping out has been responsible for a lot of engine
fires
in cars. Fuel leaks out of the cap and drips on the exhaust manifold,
then... watch out.

My 87 Turbo II had the same problem.

Barry Gardner
Wheaton, IL-

Thanks for the tip Barrry. What is the purpose of that screw anyway?

Paul Lamar

"Brian D. Cain" wrote:

The screw is meant to remain loose (?? I have no idea why??) and flexible
per
the function of the rubber diaphragm inside of the damper.  The idea is the
rubber
diaphragm moves back and forth, smoothing out the pulses in the fuel flow
created
by the fuel pump.  What happens is, over time, the screw falls out, the
rubber diaphragm
tears over time, then the unit fails, letting pressurized fuel shoot out.
Barry's right -- it's
the cause of engine fires on factory cars.  I recommend getting rid of the
unit all together
and plugging it up.

B-- 

We missed you at Sevenstock Brian. What happened?

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.