Subject: vacuum pumps.... how about this ?
From: ACRE NL
Date: 10/16/2002, 10:54 AM


Interesting,  How about a slight taper in diameter of the tail
pipe, creating a venturi,  installing a second light housing
around the tail pipe at that location, and plumb a small tube to
a vacuum reservoir. Drive your instruments from the reservoir.  I
think this should be experimented with.  I'll draw something up.
 Tom Webber

one of my pet ideas is a sort or ram - air turbine , internal to the
fuselage/cowl , using NACA ducts. I think this would be easy to make
for electric power - dunno about  vacum or positive air pumping.

IIRC  the ram air turbines on pax - jets are simply 2 - blader props
swinging outa the fuse  &  linked to alternators & { backup }
hydralic pumps.

Fly good - Bryan

Hi all:
        We had a RAT deploy on a Challenger at Gulfstream Dallas once
- EXTREMELY
LOUD. My back-up vacuum on the Cozy is still going to be a venturi on
a swing open door if
I don't install a wet vacuum pump...

Regards,
James

The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.