Subject: Oil cooler placement. Oil O-rings.
From: ACRE NL
Date: 10/17/2002, 8:11 AM


Chuck also BTW told me there were no signs of oil smoke
when starting his newly overhauled engine with the teflon encapsulated
silicone oil scrapper O-rings on the sides of the rotors.

That is very good news.
That means they are working. If they start out working they
will work forever as they are rated at 500 degrees F.
No real reason to doubt they would work it is just that one always
wonders when someone does something no one else has done.

IMHO this is a major increment in the ability
of the engine to tolerate inadvertent overheating of the oil.
These TES oil O-rings are cheaper than stock O-rings no less.

Paul Lamar


BTW, where might one find the TES oil rings for the rotors at? 
Does Tracy have them for the
Rotors?
Doug Mueller
RX-6 13BT
Henderson,NV

Yes I think he does. If not you can get them directly
from Creavey. http://www.creavey.com/

Tell Jeff Chrysler I sent you :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.