Does anyone know where to get some of these? All you can get from Mazda
is a complete wiring harness for $450. I lost one of the spring clips
that holds the connector on.

Chuck Dunlap

Real old message.
Paul Lamar
*********************************************************************

Paul Yaw wrote:

StJames515@aol.com wrote:

Hi All,
Its a long story, but.....
Thinking I would use carburetors, I filled in the injector ports in the
intermediate housing with epoxy.
Then I decided to use TC's EFI/ignition controller, so I had to drill out the
injector ports.
In the process I discover (too late) that there are (were) plastic liners with
'O' ring seals in there.
Now, as these were completely destroyed, where can I find replacement liners?

Also, If anyone know a source for the little electrical connectors that fit
the injectors, I would be grateful.

We are making progress and expect to be in the air early in the next century.
:-)
TIA
Tommy James, Glastar N78TP, <><

Mazdatrix carries the atomizers and the o-rings
http://www.mazdatrix.com. 

Call RC Engineering for the connectors
http://www.rceng.com/index.htm

Paul Yaw

 

 
The AirCraft Rotary Engine NewsLetter.  Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/            
Copyright 1998-2002 All world wide rights reserved.